BTU Bench

AC tonnage calculator

Convert air conditioner capacity between BTU per hour, tons and kilowatts. Useful when a spec sheet uses one unit and a contractor quotes another.

Your space

I know the capacity in
For example 24000 BTU, 2 tons or 7 kW.

Capacity

—
BTU per hour
Tons
—
Cooling kW
—
Cooling watts
—
Nominal size
—

Quick answer: 1 ton = 12,000 BTU per hour = 3.52 kW of cooling. Divide BTU by 12,000 to get tons.

AC tonnage chart

TonsBTU per hourCooling kW
112,0003.5
1.518,0005.3
224,0007
2.530,0008.8
336,00010.6
3.542,00012.3
448,00014.1
560,00017.6

The formulas

  • Tons = BTU per hour ÷ 12,000
  • Cooling kW = BTU per hour ÷ 3,412.14
  • BTU per hour = tons × 12,000

Central air conditioners in the US are sold in half-ton steps, usually from 1.5 to 5 tons. When a load works out between two sizes, the result panel shows the next half-ton up as the nominal size, which is how a unit would be selected from a catalog.

Capacity is not power use

A 3-ton unit moves 36,000 BTU of heat per hour, but it does not draw 10.6 kW of electricity. How much power it uses depends on its efficiency. A unit with a SEER2 rating of 16 uses roughly 36,000 ÷ 16 = 2,250 watt-hours per hour of cooling over a season. Use the AC running cost calculator to turn that into dollars.

Finding the tonnage on your unit

The outdoor unit's model number usually contains the capacity in thousands of BTU. A number with 24, 36 or 48 in it often means 2, 3 or 4 tons. Look for groups like 024, 036 or 048. The nameplate also lists the rated cooling capacity directly.

Frequently asked questions

How many BTU is a ton of AC?

12,000 BTU per hour. The name comes from the heat needed to melt one ton of ice over 24 hours.

What size AC is a 3-ton unit?

A 3-ton unit delivers 36,000 BTU per hour, or about 10.6 kW of cooling.

How many tons of AC do I need for a 2,000 sq ft house?

A rule-of-thumb figure is 2.5 to 3.5 tons, but whole-house central systems should be sized with a Manual J calculation. Insulation, windows and duct leakage change the answer by a ton or more.

Is tonnage the same as kW on a spec sheet?

Spec sheets outside the US often list cooling capacity in kW. 1 kW of cooling is 3,412 BTU per hour, so a 3.5 kW split unit is about 12,000 BTU, or 1 ton. Electrical input power in kW is a different number.